DARK Pro Base 62 (15ml)
DARK PRO BASE is a camouflaging, low-acid base coat of medium consistency, designed to be applied to nails in a thin or medium layer.
• Low-acid (pH 6.5) camouflaging base coats
• Pigmentation level from 1 to 3.5 (on a 4-point scale), dry well
• Do not peel over time
• Do not cause a strong burning sensation under the lamp
• Have a consistency closer to liquid, allowing for thin and quick application
• Not stiff; closer to flexible.
Instructions for use:
• Perform a manicure, buff the nails, degrease them, and apply Dehydrator and Ultrabond;
• Before applying PRO BASE, apply a thin layer of SCOTCH BASE clear base coat (or another medium-acid base coat) for better adhesion:
This is important, because a medium-acid base is required for adhesion to natural nails; however, keep in mind that a medium-acid base should not be used for leveling—only a thin layer should be applied to prevent chemical burns.
• Apply a thin or leveling layer of DARK PRO BASE. The layer thickness should be no more than 0.7 mm. Curing time is 60–90 seconds in the original lamp.
• Apply the selected top coat and cure it for 90–120 seconds.
100% Secure Payments: Your details are protected and safe with us.
DARK PRO BASE is a camouflaging, low-acid base coat of medium consistency, designed to be applied to nails in a thin or medium layer.
• Low-acid (pH 6.5) camouflaging base coats
• Pigmentation level from 1 to 3.5 (on a 4-point scale), dry well
• Do not peel over time
• Do not cause a strong burning sensation under the lamp
• Have a consistency closer to liquid, allowing for thin and quick application
• Not stiff; closer to flexible.
Instructions for use:
• Perform a manicure, buff the nails, degrease them, and apply Dehydrator and Ultrabond;
• Before applying PRO BASE, apply a thin layer of SCOTCH BASE clear base coat (or another medium-acid base coat) for better adhesion:
This is important, because a medium-acid base is required for adhesion to natural nails; however, keep in mind that a medium-acid base should not be used for leveling—only a thin layer should be applied to prevent chemical burns.
• Apply a thin or leveling layer of DARK PRO BASE. The layer thickness should be no more than 0.7 mm. Curing time is 60–90 seconds in the original lamp.
• Apply the selected top coat and cure it for 90–120 seconds.
100% Secure Payments: Your details are protected and safe with us.