Luna Light gel 2
LIGHT ACRYGEL LIQUID GEL — an innovative material for strengthening, smoothing, and extending nails. It is a combination of polygel and a base coat. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate (NEMA) (approximately 20–30%), the main component of base coats. This gel can completely replace a base coat.
Features:
• Polymerization wavelength: 365–405 nm.
• UV/LED lamp power—36–48 W.
• Permissible coating thickness—0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, with a medium consistency.
• Has medium pigmentation; covers the free edge.
• Full curing takes 120 seconds.
• Suitable only for nail strengthening and extensions.
• Provides good shock absorption.
• When strengthening nails with this gel, the natural nail must be filed down.
• Requires a Rubber Base coat.
• It can be heated to make the gel more fluid.
Application method:
STRENGTHENING
1. Removal.
2. Do not file the nail shape, or leave 2 mm in length, which will be removed after leveling.
3. Using a 220-grit file, gently file the top of the nail without applying too much pressure, lifting the flakes of the nail plate, or use a 100-grit buff.
4. Perform the manicure.
5. If using nail polish removers, wash your hands with soap after use.
6. Degrease the nail using LUNAmoon Nail Prep. Perform this in two steps. Use 4 wipes for this (1 wipe per 5 fingers). First step: Wipe the surface of the nail. Second pass: Take an orange stick, place a wipe on it, and wipe the entire cuticle area and the nail folds.
7. Use a primer if desired, but if the base coat has sufficient acidity, it is not necessary.
8. It’s best to apply the LUNAmoon Rubber Base with a flat gel brush. Use a rubbing motion. Fill in all the nail grooves and cure under the lamp for 60 seconds.
9. Remove the tacky layer.
10. Level the surface. If leveling with gel, leave a 0.5–1 mm margin from the cuticle. Cure under the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the edge of the nail that will support the free edge.
12. If the nail was thin, it may curl, so be sure to file off 1 mm of the natural nail from the inside. This will prevent the material from peeling off. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, remove the tacky layer and apply gel polish.
14. Apply a top coat. Cure for 120 seconds. Do not wipe the nail with anything after curing, as this may cause the shine to fade.
100% Secure Payments: Your details are protected and safe with us.
LIGHT ACRYGEL LIQUID GEL — an innovative material for strengthening, smoothing, and extending nails. It is a combination of polygel and a base coat. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate (NEMA) (approximately 20–30%), the main component of base coats. This gel can completely replace a base coat.
Features:
• Polymerization wavelength: 365–405 nm.
• UV/LED lamp power—36–48 W.
• Permissible coating thickness—0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, with a medium consistency.
• Has medium pigmentation; covers the free edge.
• Full curing takes 120 seconds.
• Suitable only for nail strengthening and extensions.
• Provides good shock absorption.
• When strengthening nails with this gel, the natural nail must be filed down.
• Requires a Rubber Base coat.
• It can be heated to make the gel more fluid.
Application method:
STRENGTHENING
1. Removal.
2. Do not file the nail shape, or leave 2 mm in length, which will be removed after leveling.
3. Using a 220-grit file, gently file the top of the nail without applying too much pressure, lifting the flakes of the nail plate, or use a 100-grit buff.
4. Perform the manicure.
5. If using nail polish removers, wash your hands with soap after use.
6. Degrease the nail using LUNAmoon Nail Prep. Perform this in two steps. Use 4 wipes for this (1 wipe per 5 fingers). First step: Wipe the surface of the nail. Second pass: Take an orange stick, place a wipe on it, and wipe the entire cuticle area and the nail folds.
7. Use a primer if desired, but if the base coat has sufficient acidity, it is not necessary.
8. It’s best to apply the LUNAmoon Rubber Base with a flat gel brush. Use a rubbing motion. Fill in all the nail grooves and cure under the lamp for 60 seconds.
9. Remove the tacky layer.
10. Level the surface. If leveling with gel, leave a 0.5–1 mm margin from the cuticle. Cure under the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the edge of the nail that will support the free edge.
12. If the nail was thin, it may curl, so be sure to file off 1 mm of the natural nail from the inside. This will prevent the material from peeling off. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, remove the tacky layer and apply gel polish.
14. Apply a top coat. Cure for 120 seconds. Do not wipe the nail with anything after curing, as this may cause the shine to fade.
100% Secure Payments: Your details are protected and safe with us.